Aluminum tapes are produced on one side in various thicknesses. It is suitable for use in the insulation of high-pressure metal alloy ventilation ducts. Adhesive aluminum foil tapes…
Neoprene Gasket is used to provide air tightness in ventilation ducts and flange joints. It is produced in different sizes.
It is used for filling and isolation in ventilation ducts, door and window frames and wall cracks. It forms a waterproof layer after drying. It is resistant to weather conditions.…
It is specially designed for heating, cooling, ventilation systems, industrial air transfer systems and powder transfer systems. It provides easy and fast assembly.
It is used as support and fastener in horizontal and vertical pipe hanger assembly, ventilation duct installation, exterior coating hangers, electrical installations. Its holes provide…
Heat recovery units are devices produced in order to save energy in neighborhoods where fresh air is required. In the summer, the cooled air in the environment is expelled, and the…
Smoke evacuation fans should be available in places where crowded groups use at the same time such as car parks, hospitals, shopping malls with closed spaces just in case. Provides…
The purpose of the pressurization is to ensure the evacuation of people in a smoke-free environment by preventing the entrance of smoke to the fire ladders and elevators and providing…
It is an industrial fan system that is used to clean the air of the environments that need ventilation, has a low or high suction/blowing capacity, is sealed and manufactured in a…
Cell aspirators and ventilators are produced serially in the desired suction and blowing directions in the range of 1000m3-75000m3 / h. The cells are made of stone wool insulated,…
Point Air Handling Units are devices that enable fresh air taken from the atmosphere to be sent to the location after conditioning. We have many types of production possibilities according…
Due to the fact that the motor is outside the air flow, air transfer can be made with high efficiency. Its body is made of electrostatic powder coated DKP sheet. The motor is outside…
Duct type aspirators, the engine of which is designed from the outside of the air flow, can be used for ambient ventilation with their low energy consumption and structure that can…
They are the elements that provide sufficient fresh air to be sent to the shelter in favorable conditions for people who have to live in adverse conditions (radioactive, nuclear, air…
Axial jet fans are fans designed for indoor car park ventilation, tunnels and large closed areas, which can activate the air without using an air duct. It does not suffer friction…
It is produced with double speed motor for daily ventilation and fire moment. It activates the air without using air duct. The body of the fans is made of high-quality galvanized steel.…
Thanks to its technological and special design, maximum air flow is achieved with minimum sound level. Air inlet side of all models are with standard protective wire mesh. It has axial…
There are alternatives such as duct type electric heaters, galvanized and stainless body used in heat recovery and ventilator systems to heat fresh air lines from Ventilation Ducts.…
They are the fans used between two ducts in ventilation systems with ducts. They have round inlet and outlet in line with the geometrical structure of the surface to be mounted. The…
Mixed flow duct fans provide high air flow rates at low noise. They can be mounted directly on the air ducts in any position needed. Thanks to the case structure, it can be easily…
The Backward Curved Rectangular Duct Fan is designed to meet medium and high-volume ventilation needs in duct systems where the rectangular duct fan application area is limited. It…
Its structure, which can be mounted directly in the ducts, can be used for ambient ventilation with low energy consumption. The body of the fans is made of high-quality galvanized…
Ex-proof fans or ex-proof aspirators are one of the preferred fan types for the ventilation of environments with high risk of explosion or flammability. Body and blade structure are…
Horizontal throw radial roof fans used to increase the air quality of indoor spaces are used in chimney or hood exits. With its external motor structure, the fan operates smoothly…
In order to increase the air quality of indoor spaces, roof fans work seamlessly in places where high performance is required with their external motor structure and high level of…
It is used for ventilation system in environments with high risks such as explosion and flammability from ex-proof fan or ex-proof aspirators. It is designed to not spark in any situation.…
The body structure has galvanized sheet, radial fan and forward curved pallet. It is suitable for use in refrigeration machines, industrial and commercial areas and places such as…
It is used for the ventilation of dusty and oily environments. It is also preferred to prevent the transfer of materials such as marble powder, plastic powder, wood shavings, nuts,…
It is preferred for the removal of large dust particles, sawdust and marble particles from the air in workshops and working environments. It is also used for the ventilation of dusty…
Snail fans are generally preferred for the cleaning of dust particles that occur in workshops and working environments from the air. It is the ideal choice for high performance and…
Axial fans used for hot or cold ventilation in various applications and systems are experts in saving space. Our standard impeller designs are recommended for high efficiency air flow.…
It is preferred in places requiring high flow ventilation. At the same time, it is suitable for use in all environments with smoke and polluted air, in closed areas where the air should…
It is used for ventilation of places with large volumes such as factories, warehouses, paint shops, shopping malls, workshops etc. The sound level is low. It is painted with environmentally…
It is a ventilation fan model that has blower and absorption features. It does not require maintenance for a long time. It has the advantage of high performance and low noise level.…
Fans made of high-quality plastic material are designed to be used in bathroom and toilet ventilation. It is highly efficient and very easy to assemble.
Fans made of plastic material are designed to be used in bathroom and toilet ventilation. It is highly efficient and very easy to assemble. It is an indispensable part of decorative…
It is silent and corrosion resistant, with automatic shutters. It is safe with its front shutter design. It does not change color, and it is protected against rust and moisture.
All electronic devices that control the speed of any engine electronically are called "speed controllers". It has small size, high precision, wide speed control range and long service…
It is used to keep the smell of burned oil in ventilation devices and kitchens for bad smell and gas purification. Thanks to the panels filled with activated carbon, its service life…
It is used as a pre-filter in all ventilation and air handling units to capture high capacity coarse and fine dust. Its high dust holding capacity is economical and can be partially…
Vent ducts with prismatic section are produced from galvanized sheet or stainless sheet. The system is completed with prismatic fittings. Ventilation ducts provide guaranteed sealing…
Air ducts are used for air transport in air conditioning, ventilation installations or industrial ventilation and air and transportation installations. It offers fast and easy assembly.…
It is a glass wool board that can be covered with yellow or black glass tulle and aluminum foil on one side. It is used for external thermal insulation of ventilation and air conditioning…
They are rock wool boards covered with aluminum foil on one side. It is used for external thermal and sound insulation of ventilation and air conditioning ducts and fire safety.
It is designed for use in heating, cooling, ventilation, air-conditioning and waste gas passage lines in medium and low-pressure environments. It is airtight and does not transmit…
It is designed for use in heating, cooling, ventilation, air-conditioning and waste gas passage lines in PCV flexible air duct, medium and low-pressure environments. PVC flexible air…
It is designed for use in heating, cooling, ventilation, air-conditioning and waste gas passage lines in medium and low-pressure environments. Being flexible and bendable, it provides…
It is also very suitable and efficient for heating, cooling, ventilation and air conditioning systems. It has an extremely high flexing, bending and compressibility feature.
Turbo ventilators are a wind-driven ventilation system that does not require any electrical energy source. It is preferred in the market thanks to its long life, easy to use and maintain,…
It is mounted on the roof or on the wall to provide effective ventilation for any building. It is a good choice for those who want to get fresh air and good working environments. It…
Provides fresh air flow. It is mounted on the roof or on the wall to provide effective ventilation for any building. It absorbs hot air, moisture, dust, bad smell and smoke and reduces…
It is mounted on the roof or on the wall to provide effective ventilation for any building. Provides fresh air flow. It absorbs hot air, moisture, dust, bad smell and smoke and reduces…
Provides fresh air flow. It works without electrical power. It absorbs hot air, moisture, dust, bad smell and smoke and reduces indoor noise. It has high and efficient ventilation…
It is a wind-operated ventilation system that does not require any electrical power. Provides fresh air flow. It has long life, easy maintenance, efficient and high performance. It…
It is generally used in suction line applications in the air conditioning ventilation and heating sector. It consists of a single row of blades arranged horizontally or vertically.…
Double row bladed grilles are used in ventilation and air conditioning systems to distribute the blowing air into the space. It consists of double row of blades arranged horizontally…
It is used as blowing and suction grille in heating, cooling and ventilation systems. Linear grilles are the most preferred product thanks to their aesthetic appearance. It is suitable…
It is used as suction grille in ventilation systems. It is made of narrow casing with claws aluminum profile and specially cut aluminum sheet. The blades are fixed on the horizontal…
Model volumetric air regulating dampers are used as rectangular air regulating element in ventilation systems. Blades and frame are made of aluminum profile.
It is used to absorb the intake air from inside the space, transfer it to heater cooler sources such as hidden type fan-coil, split air conditioner, vrv placed in/between the suspended…
The frames of the blowing or suction grilles are shaped according to the round duct surface. The round duct grille is made of aluminum profile.
It is used for suction and blowing purposes in ventilation systems. It is designed for ceiling applications. In its frame, first-class aluminum profile blade and aluminum or galvanized…
It is used for suction and blowing purposes in ventilation systems. In its frame, first-class aluminum profile blade and aluminum or DKP sheet are used in its block. It is suitable…
They are used as a safety element during the fire and to prevent the fire from spreading from the ventilation duct in a certain period of time.
Basic fans in the Bvn ventilation device industry are duct type fans with different names such as radial duct fan, duct aspirator, pipe aspirator and egg type fan. Fans are used to…
Production is available in any thickness and size from 0.50 mm to 1.20 mm in accordance with DW 142-143, DIN 24-194 and TSE standards. In every color code, painting, rubber and acoustic…
They are small air pouches, one side of which is covered with aluminum foil or black glass, providing fire safety of ventilation and air conditioning ducts, external thermal insulation…
It is a multipurpose heat insulated flexible air duct specially designed for heating, cooling, ventilation, air conditioning and waste gas systems operating at low and medium pressure.…
Turbo ventilators are a wind-driven ventilation system that does not require any electrical energy source. Provides fresh air flow. It helps to reduce the moisture in the floor and…
The grille is a filter system that provides the entrance of fresh air according to the angle of the covers of the lids and to let out the dirty air. Thanks to the wire mesh on the…
Established in 2019, Mert Krom Metal Isolation Cons. Ind. and Int. Tra. Inc., our company has started its activities with Galvanized Sheet and Galvanized Sheet types (Coils, Slitting,…
Copyright © Mert Krom Metal Isolation